The Tool Library at Marston Science Library is equipped with a diverse array of tools available for in-library use or for check-out. The purpose of the Tool Library is to cultivate an active learning environment where patrons are encouraged to repair rather than replace.
8.0 Amp motor delivers high performance in heavy-duty applications
3/8-inch ratcheting keyless chuck for greater bit retention
0-2,500 RPM, vsr trigger for versatility in drilling and fastening applications
Drill Bits: Titanium drill bits for drilling in non-ferrous metals, wood, and plastic and are ideal for commercial and residential applications. Screwdriving Set: Includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended bits.
The Stanley 94-248 65-piece general homeowner's tool set includes one 13-ounce hammer, one 16-foot tape rule, one 18mm snap-off knife, one torpedo level, one long nose and one slip joint pliers, one Phillips screwdriver, one standard tip screwdriver, eight SAE and eight metric hex keys, one 1/4-inch round-head ratchet, eight SAE 1/4-inch sockets, one 1/4-inch spinner handle, one 1/4-inch bit holder, and 30 bits.
The Bosch GLL 30 Self-Leveling Cross-Line Laser projects two lines, making a cross-line projection. The laser lines are visible up to 30 Ft. The Smart Pendulum System self-levels and indicates out-of-level condition to help ensure an accurate layout, and it locks the lines at any angle. The pendulum system locks when switched off, to assure secure tool transport. The included MM 2 Flexible Mounting Device provides microfine height adjustment, and it allows the laser to be clamped on virtually any surface from 1/2-Inch to 2-1/4-Inch thick, for level lines at any height.
The Marston Makery is a small makerspace with the equipment below available. To use the equipment, please make a reservation and visit the service desk at the entrance of Marston.
This section contains different projects to get started using the tools. Time to get your hands dirty..
How to Solder - Through-Hole Solder - Sparkfun
Soldering is one of the most fundamental skills needed to dabble in the world of electronics. The two go together like peas and carrots. And, although it is possible to learn about and build electronics without needing to pick up a soldering iron, you’ll soon discover that a whole new world is opened with this one simple skill.
How to Use a Multimeter - Sparkfun
This tutorial will show you how to use a digital multimeter (DMM), an indispensable tool that you can use to diagnose circuits, learn about other people's electronic designs, and even test a battery. Hence the 'multi'-'meter' (multiple measurement) name.